Date: Friday, September 16th, 2022
Time: 8 AM to 4:30 PM
Location: Denis Delehanty’s Studio at: 15832 Berlin Turnpike, Purcellville, VA 20132
Cost Including Wood: $100.00
Registration link:
Workshop Project: Offset Turned Boxes.
Bring your lunch or order out with other members of the workshop.
There are openings for eight students in the workshop. Based on a first come, first served sequence the first 8 club members who have fully paid their dues and workshop fee will be offered a space. The next 3 are alternates. Should a primary student drop out, the first alternate will be offered the position and a refund will be provided.
Previous Workshops
Date: Friday, July 15th, 2022
Time: 8 AM to 4:30 PM
Location: Denis Delehanty’s Studio at: 15832 Berlin Turnpike, Purcellville, VA 20132
Cost Including Wood: $60.00
Registration link:
Workshop Project: Turning a platter.
Bring your lunch or order out with other members of the workshop.
There are openings for eight students in the workshop.
Date: Friday, October 15th, 2021
Time: 8 AM to 5 PM
Location: Denis Delehanty’s Studio at: 15832 Berlin Turnpike, Purcellville, VA 20132
Cost Including Wood: $ 90.00
Registration link:
Workshop Project: Turning a Tea Pot requiring Off-Axis and Muti-Axis turning.
Bring your lunch or order out with other members of the workshop.
Workshop tool requirements:
- a steb center or spur drive
- live center
- expandable four jaw chuck
- compass
- metric ruler or tape
- 4.5″x4.5″x9″ rectangular blank, 5″ to 6″ blanks can be used as well
- small square
- a hollowing tool
- bowl gouge or spindle gouge
Compasses, rulers and squares can be shared if necessary. It would also be helpful but not necessary to have some jacob’s chucks with 2″ forestner bits on hand. Short tool rests would be helpful but not necessary.
There are openings for eight students in the workshop.
Mini Hat by Jerry Measimer
Date: August 20th, 2021
Time: 8AM-4 PM
Cost: $100 + $20 (wood) = total $120
Location: Place: Denis Delehanty’s shop – 15832 Berlin Turnpike, Purcellville, VA 20132
Register: link is here
Details: Jerry Measimer will hold a workshop on August 20, 2021 to teach us how to turn a mini hat. Participants will get an understanding of good tool control, turning green wood, bending the wood and using a light to reach very thin walls.
Interactive Remote Demonstration with Cindy Drozda
Date: Thursday, July 30th, 2020
Time: 7-9 PM
Location: The Interactive Remote Demonstration (IRD) will be presented via Zoom event. The Zoom event ID and password will be emailed to all registered attendees between 1-5 PM on July 29th.
Cindy’s Biography: Cindy Drozda is a full-time woodturning artist from Boulder Colorado and has been turning since 1985. Her elegant lidded vessels combining classic forms with delicate finials are exhibited at the finest juried art shows in the country. She has been invited to teach in Canada, England, and at symposia and clubs across the US. Before choosing woodturning as a career Cindy worked as a cabinet maker, rebuilt airplanes, and made hang gliding equipment. In 1988, she participated in a 6 month long crossing of the entire US by non-powered hang glider. Woodturning is her latest exciting adventure!
Date: Friday, April 17th, 2020
Time: 8 AM to 5 PM
Location: Denis Delehanty’s Studio at: 15832 Berlin Turnpike, Purcellville, VA 20132
Cost Including Wood: $ 1200.00
Workshop Project: Turning a Tea Pot requiring Off-Axis and Muti-Axis turning.
There are openings for eight students in the workshop.
Date: Wednesday, March 11th, 2020
Time: 8 AM to 5 PM
Location: Denis Delehanty’s Studio at: 15832 Berlin Turnpike, Purcellville, VA 20132
Cost Including Wood: $ 150.00
Workshop Project: A hollow form turned from green wood.
There are openings for eight students in the workshop. Registration for Mark Gardner’s workshop will open Saturday evening, February 15th at 7:30 PM
Eight inch Square platter that is painted and carved from edge to edge.
Click here to find more information about Al from his website
