Events - Event View
This is the "Event Detail" view, showing all available information for this event.
If the event has passed, click the "Event Report" icon to read a report and view photos that were uploaded.
October 2024 Ornament Workshop
Registration Info
Registration is required
Payment In Full In Advance Only
Capacity
8 Total Slots
2 Available Slot(s)
About this event
This is a beginner up workshop - Ho Ho Ho!
Cost of wood blanks for the six different items is $10.00 each.
Each person will receive at least two blanks for each ornament. Redesign opportunity blanks will also be available. All the cross-drill ornament blanks are going to be predrilled so as to save time. It will be explained to everyone how to drill them.
Here are some photos of the projects
|
October 2024 Ornament Workshop
|
|
|
Face Shield - Mandatory
|
|
|
Dust Mask -
|
Optional
|
|
Thin/Medium CA
|
|
|
Lathe Chuck (1-1/4" x 8TPI) with Pin or Step Jaws
|
|
|
Apprentice Pen Center MT2 (Under Pen Turning tools)
|
Optional
|
|
Jacobs Chuck w/ MT2
|
|
|
3" Tool Rest -I" dia, Long shaft
|
Optional
|
|
1" Forstner Bit
|
|
|
3/4" Forstner Bit
|
|
|
5/64 Drill Bit
|
|
|
Brad Point Drill bit - 1/4"
|
|
|
1/4" open end wrench
|
|
|
No.60 Drill Bit (will be Provided)
|
|
|
Steb Drive Center - 3/4"
|
Optional
|
|
Parting Tools - 1/16", 3/32" 1/8" (1/4" optional)
|
|
|
Spindle Roughing Gouge - 3/4" or 1"
|
|
|
Spindle Gouge 3/8" (1/2", 1/4" optional)
|
|
|
Bowl Gouge - 3/8" (1/2", 1/4" optional)
|
|
|
Detail Spindle Gouge- 1/4" or 3/8"
|
Optional
|
|
Skew - 1/2" or 3/4"
|
|
|
Smal set calipers
|
|
|
Dividers/Calipers
|
|
|
6" Ruler (12" optional)
|
|
|
Center Finder
|
|
|
Center Punch
|
|
|
Pencil
|
|
|
Pull / Cutoff Saw
|
|
|
Easy Wood Detailer- Diamond Pointed Shaped Tool
|
Optional
|
|
217-1/2 Small Screw Eyelets (will be Provided)
|
|
|
Small work Table
|
|
|
SHOP FURNISHED
|
|
|
Powermatic or Laguna Lathe with 1-1/4" x 8 TPI spindle thread
|
|
|
Oneway Talon 1-1/4" x 8tpi threaded with 50mm Smooth Jaw set
|
|
|
Safety Drive Center
|
|
|
13" Tool Rest with 1" diameter post
|
|
|
6" Tool Rest with 1" diameter post
|
|
|
CBN Wheel Grinder & Wolverine Sharpening Gigs
|
|
|
Lathe Light
|
|
|
Live Center plus Cone Center Adapter
|
|
|
4-Point Spur Drive Center
|
|
Invalid Quantity