Events - Event View

Each workshop attendee will have the opportunity to complete the following stages of making a beads of courage pot using segmented construction and turning techniques. A discussion about how to size and cut segments will also be part of the workshop. Glueing and marking the segmented rings. All of the segments are cut, but need to be glued for additional projects for BOC. Everyone should strive to glue at least one ring. Turning the outside round and making the disk surface flat. The tenon will work with most #2 square jaw chucks. Glueing a ring onto the flattened base from the previous step. This ring will be made before the workshop and already be ready to be glued onto the bottom disk. (It is not the product from the previous step) Turning the bottom ring round and to dimension. Again, I will make this assembly before the workshop. (It is not the product from the previous step) The final glue-up, top, and knob will be turned to dimension so that attendees will have a finished project other than final sanding and finishing. BONUS: If time permits, a small segmented bowl could be made. of Courage Workshop with Scott Schlosser